Chroma Chroma-Q User Manual download pdf (Page 17)

Color Force User Manual 16 V1.7 November 2013

www.chroma

q.com

2.8 Thermal Performance

The Color Force 48 & 72 fixtures feature 2 internal fans that drive the internal cooling system.

If the internal temperature of the Color Force exceeds 75ºC the output of the fixture is reduced for automatic protection. This

happens on rare and extreme conditions when ambient temperature is over 35ºC or the internal fans are blocked or damaged.

The airflow to and from the fan must not be constricted to maintain the maximum operating capacity of the Color Force.

3. Troubleshooting

Troubleshooting is a process of elimination. First, rule out the other field factors (i.e. bad connections, faulty cables and power

supplies). For technical support and/or parts, please contact your selling dealer or the offices listed in this manual.

Symptom Possible Cause Solution

Fixture does not respond to

DMX control.

Set to wrong or different DMX address.

Bad cable connecting DMX control and fixture.

Bad in/through connection between adjacent

fixtures.

Check DMX address and Mode

settings.

Check/replace DMX run from the

console.

Noise from fixture unit. Fan malfunction. Check fan.

Low LED output. Internal temperature is over the limit.

Fan is not working.

Check “Fan Control” mode.

Check fan.

Check for airflow - to and from the

internal fan.

Check area ventilation.

1 2 ... 12 13 14 15 16 17 18 19 20 21

No comments

Chroma Chroma-Q User Manual Page 17