Color Force Compact User Manual 24 V1.8.1 December 2014
Technical
TechnicalTechnical
Technical
In this mode, the frequency settings of the unit can be changed, and addressing software for the Compact LED
engines can be uploaded.
1.
From the Main Menu, scroll and select Technical
TechnicalTechnical
Technical
2.
In Technical
TechnicalTechnical
Technical, select either Frequency
FrequencyFrequency
Frequency or Upload H
Upload HUpload H
Upload Heads
eadseads
eads
Frequency
FrequencyFrequency
Frequency:
The power supply unit has four frequency settings available - 1200, 2400, 4800, 9600. This allows for the LED
scan rate to be synchronised with the video camera and avoid a flickering effect.
1.
In Frequency, press the Up/Down buttons to select the desired frequency,
2.
Press Enter for 2 seconds to save.
Upload Heads
Upload HeadsUpload Heads
Upload Heads:
The LED engine/s addressing software for the Compact fixture can be uploaded to the power supply unit from the
Chroma-Q Uploader:
1.
Connect the Compact fixture/s to the PSU.
2.
From the Main Menu, scroll and select Technical
TechnicalTechnical
Technical.
3.
In Technical
TechnicalTechnical
Technical, select Upload Heads
Upload HeadsUpload Heads
Upload Heads then press Enter, and the display shows Ready
4.
Connect an XLR 5-pin cable from the Uploader to the unit.
5.
Power-up the Uploader - display shows the file name, and Ready.
6.
Press the GO button once to execute the uploading - red indicator light on the GO button blinks.
7.
The Uploader display shows a simulated arrow moving from left to right indicating the uploading process.
8.
The Green LED circuit will light up (low intensity) to indicate completion of a successful Upload and the
Uploader display shows DONE.
9.
Power-cycle the unit.
(See Quick Start Guide of the Chroma-Q Uploader)
Fan Speed (PSU15 only)
Fan Speed (PSU15 only)Fan Speed (PSU15 only)
Fan Speed (PSU15 only)
The Compact power supply units are built with internal fans with the following speed settings:
Live fan speed is at high velocity
Live when
Light
fan speed goes to high velocity when LEDs are turned on and remain at very low velocity when
LEDs are off
Studio fan speed is at low velocity
Quiet fan is off
To set the Fan Speed,
1.
From the Main Menu, scroll and select Fan Speed
Fan SpeedFan Speed
Fan Speed
2.
In Fan Speed
Fan SpeedFan Speed
Fan Speed select a speed setting.
3.
Press Enter for 2 seconds to save.
Reset to Default
Reset to DefaultReset to Default
Reset to Default
The fixture can be reset to factory default settings:
1.
From the main menu, scroll and select Reset to Default
Reset to DefaultReset to Default
Reset to Default
2.
Press Enter, display shows reset?
reset?reset?
reset?
3.
Press and hold Enter until the display shows resetting
resettingresetting
resetting and done
donedone
done when complete
(21 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals